The ship is defined in terms of its size and the shape. This is required to find out it’s characteristics for stability, resistance, power needed to run the ship at a particular speed, her seaworthiness, it’s maneuverability, load carrying capacity etc. Read about the terminology that is used in the naval architecture and ship construction. Also know about the […]
Marine Engineering is that branch of technical education that covers, mostly the technical aspects of marine machinery. It includes marine engines, offshore units etc. This field needs people to have knowledge of various different fields in much deeper manner, which includes safety as well. But if you start studying about something related to this, you might end up in having […]
Get to know about the marine sewage treatment plants working, types and regulations concerning the discharging of sewage in to the sea. The important details regarding this topic have been covered in detailed manner. Regulations Regarding Sewage Discharge In to the Sea Discharge of Sewage is governed by MARPOL Annex IV, stating that discharge of comminuted and disinfected sewage using a […]
In this article get to know about boiler burner maintenance, fuel injector testing, CO2 line testing, cylinder head testing and HP cut out problems in details. Here are some of the most common questions that are framed out of the problems that are faced in the common machinery. Some of the answers have been taken […]
Here are some of the questions for oral preparation for your engineer COC examinations. This article covers the Marine Engineering Practice questions. These are the questions that we are covering in this article. Some of the questions have been taken from social platforms as well. Marine Engineering Practice Questions 1) Freshwater Generator Starting Here you […]
This is the third article in this series. We have covered topics like Steam, Liner, Control air, Sea Water Line, Expansion tank, Sump, Spanners, O- Rings, Mechanical Seal and Crankshaft Deflections. Questions given here might be useful for you if you are sailing on ship or giving your officers exam. You can read about first […]
This is our second article in the Marine Engineering Practice Series which deals in questions related to the troubleshooting of the ship machinery etc. Plus some of the questions that might be asked to you when you are preparing for your officer exam have also been discussed. Here is the first article in this series: […]
Boiler gauge glass needs to be blow down, regularly, to make sure that it is showing the correct reading and there is no blockage in the line of water and steam. This is also to check that, water and steam cocks are not leaking. This is a physical mean of showing the correct level of water in the boiler. […]
Find the answers to the questions related to troubleshooting of various machineries onboard like hydrophore system, and they come in Marine Engineering Practice.This is the first article in our series related to the Marine Engineering Practice, in every part we will try to cover 10-11 questions with answers.In places where we think diagram is necessary, we will add […]