How to Prepare Ship Engine Before Departure

In this post, get to know about how ship engine is prepared before sailing. For a smoother departure, it is quit necessary to follow guidelines as given by company, also called as checklist.
In this article you will get to know about the general, yet important things that you have to do, in order to prepare the engine room for departure. So let’s see them one by one. The duty deck officer will generally call the duty engineer officer for 1 hour notice before sailing.
Note: Most of the things that are discussed here are as per the UMS ships. But that does not mean that all the points mentioned
below, does not apply to the non UMS ships.
 

Preparing Ship Engine for Sailing

Here are some of the general approaches you need to take:
1)   Take sounding of the main engine lube oil sump. Make sure that the purifier for the main engine is running, so that oil is hot enough and clean enough. Now you can run the departure program for the engine. Which includes running of pumps like main engine lube oil pump, crosshead lubrication pump, HT pumps, stern tube pump, feed pumps for boiler (if stopped). Turn the engine with the
help of turning gear for 20 minutes. You can also turn on the cylinder lubrication.
Engine Starting, Prepare Ship Engine
4)    In the mean time start from top of the engine room and check level of water in expansion tank.
5)    Check the boiler for correct firing etc. Flame color and shape is important.
6)    Check the oil level in the working and starting air compressors. Put if necessary.
7)    Drain both control air and starting air bottles. Till when you don’t see any water coming out. Also set the preference for compressor starting.
8)    Make sure that the indicator cocks for the main engine are open.
9)    Open the starting air for main engine.
10)                       Fuel oil purifier is running.
11)                       Bilges are at low level.
12)                       Drain the settling and service tanks of fuel oil and check for any water.
13)                       Generators fuel racks are lubricated and sump level checked. Also set the preference for generator starting.
After doing all of these, you can go for following checks.
1)    Telegraph Check
2)    Emergency Telegraph
Check
3)    Emergency Phone Check.
4)    Steering Gear Check.
After doing these checks, you can disengage the turning gear and close the drain of the turbochargers. With the permission from the bridge, you can go for air blow. Just see if any water comes out of the indicator cocks. If not, then close the indicator cocks. If yes, then you need to identify the problem with that particular unit. Now the engine is on standby and you are ready for the sailing.
After Departure, changeover the sea chest, from high to low (If the ship is having the system of low and high). Start the fresh water generator, if you are going away from the coastal waters. The heating for the engine is needs to be stopped, as engine is generating heat itself. Fuel oil transfer pump can be put on auto now.
So this was all about the preparing the engine room for the departure. Hope you enjoyed reading this post. If you have something to add, please comment below. This was all from ‘How to Prepare Ship Engine Before Departure’.

You Might Like to Read These Posts Too:

Ashish S

Hi there! Well I am not a writer, just writes what can help people-that's it. Interested in listening from you. Loves to talk about gadget, music, nerdy stuff and witty substance in the talks. A Good respect in heart- for web.

4 thoughts on “How to Prepare Ship Engine Before Departure

  • May 11, 2017 at 10:45 am
    Permalink

    Sir i’m cadet of engine . I have a question . Are we need a generator for start M E also ?

    Reply
  • October 17, 2017 at 9:28 am
    Permalink

    what about changing cylinder lubricator between high and low? is that for certain engines only? I think we have to also perform bow thruster tests. and also switch auxiliary blowers to auto position

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Special Topics For You

Read these

Chief Officer Work, Responsibilities and Salary Chief Officer or Mate is just below the Captain position and is considered as head of Deck Department, just like 2nd Engineer for Engine Room. Being...
Life of a Cadet At Sea: A beginning of future Cadet, whenever this word comes into the mind of people they already sense of what they are talking about. Engine or Deck Cadet is first step on the...
Marine Engineering Practice Questions and Answers-... Find the answers to the questions related to troubleshooting of various machineries onboard like hydrophore system, and they come in Marine Engineer...
Engine Room Watchkeeping Rounds Guide for Marine E... In this article we will see about the things that you need to look after when taking the engine rounds. With the advent of UMS ship, the traditional...
Controllable Pitch Propeller System Fails-How To T... CPP systems are used in various merchant vessels. They have advantage of good maneuverability. But if this system fails, then it might create lot of...
Ultra Large Container Ships: All You Need To Know ULCC or Ultra Large Container Carriers are the new breed of ships that has taken the toll on the shipping market in a very short period of time. Let’s...
Lloyd’s Register of Shipping Offices Address... Get to know about all the offices of the Lloyd's Register of Shipping and their contact details as well. If you are planning to use their services, ...
What is Overspeed Trip, its types and how it works An overspeed trip is required to ensure that fuel supply will be cut off from engine if its speed exceeds the predetermined value. Over speeding wi...
error: Content is protected !!