Life Boat Launching Procedure and Recovery

In this article get insights about procedure of life boat launching and what precautions that you will take while doing so. Life boats are an emergency requirement when no other option has worked to keep ship afloat. During this time, it is necessary that the lifeboats that are provided on the ship to be launched and all the people onboard evacuate to a safer area.
There are various reasons for leaving a ship like Fire, Flooding, Structural failure of Ship, Bad Weather etc. In this case, it is quite necessary that crew launch the boat in proper manner and in a shorter time. After every person on the ship is accounted for at muster station, next step is to launch the life boat. The description given here is general and something may vary slightly as depending on the ship.

Step by Step procedure of launching Life Boat

·         Only on the verbal announcement of the master, ship needs to be evacuated.
·        First count all the people are at the muster station. This is quite necessary. In the mean time, people will carry out their jobs like Cook will bring blankets; engineers will test the engines etc.
Life Boat

 

·        If needed, then we need to secure the painter line, both forward and aft.
·        First remove the safety pin at the winch brake lever.
·        Release the davit arm cradle clamp from the forward and aft end of the embarkation platform area by removing the safety pins.
·        Gribes, which are holding the lifeboat, will automatically get released as the davit is released.
You might be Interested in Reading: Tips for Joining Merchant Navy
·         Now lower the lifeboat till the embarkation deck, with the help of tricing pendant. And bowsing tackle will be used for bringing the lifeboat closer to ship structure in rough whether.
Note: some ships have embarkation deck at the same level as boat, so need to lower it. Everyone can board from there.
·        Engineer and officer, will go inside and close the drain plug. Deck officer will check the navigation system. Engineer will check the engine.
·        After everything is ok, people can start boarding the boat.
·        Make sure that people are sitting properly and have worn their lifejackets.
·        Close the doors and with the help of brake remote control wire, lower the boat slowly.
Note: In rough Weather, never do offload release, always do on load release. Hope you liked reading this piece of information. So, this was all about the Launching of lifeboat.

You Might Like to Read These Posts Too:

Mark Eriscson

Love to write about topics related to maritime sector. Was born in sailor's family, so love to ride on those high seas. In free time i would like to go for a good sunbath and some soothing guitar music. Want to have my own boat one day.

One thought on “Life Boat Launching Procedure and Recovery

Leave a Reply

Your email address will not be published. Required fields are marked *

Special Topics For You

Read these

Engine Room Fire Fighting: Explained With A Case S... Fire is one of the most dreaded accidents on board. Engine Room Fires more so, because of the difficulty in actual Engine Room Fire Fighting exercis...
Controllable Pitch Propeller System Fails-How To T... CPP systems are used in various merchant vessels. They have advantage of good maneuverability. But if this system fails, then it might create lot of...
Top Dirtiest Jobs on Ships You Will Avoid You must have seen the Dirty Job series on Discovery, but let’s have a look what is out there on our ships. Dirty Jobs on Ship Lets have a look at...
What is Enclosed Space and Precautions while enter... In this article a thorough discussion about the enclosed spaces and precaution that need to be taken by any seafarer while entering into it, has bee...
Types of Fire Extinguishers used on board ship This article deals with the knowledge of type of fire extinguishers that are used on board ship. This is the first in the series called as the 'Portab...
Five Common Mistakes On Ship-That Can Put Your Lif... Countless Things have been said on the topic, some hit the bull’s eye, and others seem as Unwelcome Sermons.But, Needless to reiterate the fact that...
What is Bunkering Process, How it is done and Prec... In this article we will study about the process of bunkering (Oil for Ship). Bunkering is referred to as taking of oil or bunkers on board ship. Ship...
Black Out on Ship, Recovery and Actions to be take... Black Out on Ship is a common term which is used, when she loses all the power due to the failure of generators. Well  the reason of happening such...
error: Content is protected !!